"Starburst Fairway" Reclaimed Wood Artwork

"Starburst Fairway"

Gorgeous. Game. Changer.

Handcrafted artwork made from individual strips of beautifully textured reclaimed rough sawn cedar fencing. Meticulously tapered to a razor thin point, each strip is hand finished in a wide array of custom colors, sanded and installed one by one.

Over 170+ pieces - individually hand sanded, hand stained and painted - are carefully placed, glued and pin nailed to the new plywood backing... then squared, trimmed and sanded to size.

Finished in a myriad of browns, grays, whites, creams and dark red hues... the "Starburst Fairway" introduces an exciting variety of teal and turquoise to the mix - of durable, quality semi solid and semi opaque stains and Low VOC water based paints.

22" x 22" x 1 3/4" (shown in photos)

Made to Order Only. Please allow up to 4 weeks to complete.
Please read the FAQ and OUR PROCESS pages for more information.

The cedar frame shown in photos features a mitered corner.

All surfaces are finished and sealed with at least three coats of quality clear satin poly finish... with hand sanding between coats for a feel and luster that resembles wax and is neither too dull or too shiny.

The back is neatly finished with brown paper and is signed, titled, and dated.

All Artwork arrives Ready to Hang with Two (2) Large Metal D Ring Hangers.
~ No other wires are necessary to add
~ Large Hangers can support up to 100 lbs. each - and are screwed into the plywood for superior strength and hold
~ Hanging Instructions are included in every order
~ Two Course Thread Screws - perfect for sheet rock applications - will accompany your order

Recommended method of cleaning/dusting: Gently use a soft bristled brush or vacuum with brush attachment.

Images in photo may not be to scale and is shown for design purposes only.

NOTE: Our Reclaimed Wood Artwork is One-of-a-Kind. While each piece will be carefully handmade using the same varieties of reclaimed woods… finished in the same or similar stain and paint colors and techniques...it is virtually impossible to replicate two different pieces of this artwork to look exactly alike.
The reclaimed wood found in our artwork may contain some or all of the following: the original surface saw cuts, wood knots and holes, uneven thicknesses, notches, scraps, crevices, rust stains, nail holes, discolorations and other imperfections or blemishes. Each will be examined on an individual basis by the Seller for its integrity and solidness – and/or may be filled with wood filler, hand sanded to remove splinters or rough patches or left alone to create textural interest.
These characteristics are what make each piece of artwork unique and should not be considered a defect.
However, if one of these features is a concern - please speak to the Seller prior to ordering or at the beginning of the project to avoid delays.